LEBLOND CNC Gap Bed Lathe

$29,500.00

Listing Information

ID #:
Brand: LEBLOND
Model: 3220 NF
Type: Engine Lathe
Control: CNC (Fanuc 21iT )
Year:
Condition: Used – Excellent
Location: Livonia, Michigan
United States
Description: Beautiful LeBlond CNC Gap bed lathe
New Fanuc 21iT CNC retrofit 2014. New electrics, motors, drives.
Like new
Includes taper attachment, inch threading

Price:  $29,500.00

GENERAL CAPACITY:
Swing over bed and carriage wings: 36”
Swing over cross slide: 20 ½”
Swing over 24” wide gap: 56” (approx)
Distance between centers (max. turning length) in increments of 24”: 156”
Steady Rest Capacity, min. and max. diameter, standard size: 1 ¼” to 12”
Steady Rest Capacity, min. and max. diameter, oversize: 9 ½” to 20”
Follow rest Capacity, min, max. diameter: 1 ½” to 7”
Face plate diameter, small (standard equipment): 14”
Distance, spindle center to floor: 43”
Chuck Size: 36” 4-jaw chuck
HEADSTOCK:
Spindle speeds, number: 36
Spindle speeds range: 5.4-600 rpm
Spindle diameter at bearings –front, center, rear: 8”, 6”, 4 5/16”
Front spindle bearings, two Timken #0, outside diameter: 12 1/2”
Radial load at 100 rpm……: 106,800 lbs.
Thrust load at 100 rpm……: 47,700 lbs.
Center spindle bearing, outside diameter: 8 858”
Radial load at 100 rpm……23,300 lbs.
Read spindle ball bearing, outside diameter: 7 7/8”
Radial load at 100 rpm……21,790 lbs.
Spindle, diameter of hole, straight: 3 1/16”
Spindle, diameter of hole, taper (No. 350 ASA): 3 1/2”
Spindle, size of center: #6 Morse
Spindle nose, standard taper key drive, size: L3
Spindle nose, diameter, large end of taper: 6 1/2”
Headstock length on bed: 48 5/8”
CARRIAGE AND COMPOUND REST:
Length on ways: 46 3/4”
Bearing surface, square inches: 415
Bridge width: 15”
Cross slide travel, with taper attachment: 21 1/2”
Cross slide travel, without taper attachment: 23 1/2”
Compound rest travel: 10 1/4”
Carriage rate of rapid traverse, feet per minute: 28
Cross slide rate of rapid traverse, feet per minute: 7
Tee slot surface to center of spindle: 3 5/16”
Size of tool: 1” x 2”
BED:
Length: 156”
Width: 34”
Depth: 26 1/8”
FEED AND THREAD RANGE:
Feed and thread ranges: 48
Feeds, standard range: .004” to .250”
Threads per inch: ¾ to 23
Lead screw diameter and threads per inch: 2 3/4” – 2”
TAPER ATTACHMENT:
Maximum taper per foot: 4”
Maximum turning length at one setting: 24”
TAILSTOCK:
Spindle diameter: 8”
Size of center: #6 Morse
Spindle travel: 18”
Length on ways: 28 1/2”
Set-over, either side of center: 1/2”
MOTOR DATA:
40 hp; 3 phase; 440 volt
SHIPPING WEIGHT:
30,050 lbs.
Floor Space Required:
210” X 105”

 

Seller Information

Company: CIM Technologies, Inc.

Steve Fox 1-734-513-2525

Address: 31965 Schoolcraft
Livonia, Michigan

Reviews


There are no reviews yet.

Be the first to review “LEBLOND CNC Gap Bed Lathe”